Thursday, June 25, 2020

What to do if my hand is stuck with 502 glue

What to do if my hand is stuck with 502 glue

1. Use the hardness of glue:

502 glue is very hard after drying. This feature is an advantage and a disadvantage. The advantage is that it can bond hard objects very well, but some with greater flexibility often have no long-term effect, that is to say, at the beginning The adhesion is good, and the glue is opened after a while. Using this feature, when your two fingers are glued together, rub the glue between the two fingers vigorously. The method of rubbing is actually very random, mainly to loosen the glue. After rubbing for a while, try to see if you can separate the two fingers. If not, continue to rub, and the problem can be solved within half an hour.

2. Blisters:

This method is relatively simple, that is, when the glue has just dropped on the hand and it is not dry, quickly put your fingers in cold water and soak for a few minutes, you can see the glue becomes a solid, you can easily put the glue Buckle it from your hand. If the glue is already dry on your hands, then you will have no effect if you use water again, so it is better to grasp the timing.

3. Natural shedding method:

If your hand is stuck with a piece of paper or other small things, don’t worry, if this does not hinder your daily life, you can let the glue stay on your hand for one day, and it will automatically fall off within two days. The way is to wait, don't be anxious.

4. Dissolution method:

In fact, there is nothing that can completely dissolve 502, and it can only be softened a bit. For example, insulating oil can play a role in softening and quickly rub off after softening. Some people say that using acetone is highly toxic and should not be used lightly. If you don’t have insulating oil, you can use gasoline. If you can’t, you can only try it with edible oil.

5. Use insulating oil:

Use the cover to pour the insulating oil in the transformer and apply it to the glue area. The cured 502 glue will soon become soft and can be rubbed off.

Ways to prevent 502 from sticking hands:

1. If you often use 502 in your work, in order to prevent the glue from sticking to your hands, apply flour or powder foundation and other powder particles to your hands in advance, or simply rub some soil on the ground. The glue dripping onto the hands can only stick to the hands. Powdery substance, nothing at hand. The best way is to apply some hand cream on your hands.

2. With cotton gloves: Gloves can prevent glue from dripping onto your hands, but not all gloves can play a protective role. If the gloves are rubber or plastic, the glue will melt the gloves and release heat, which may burn you. Hand. Therefore, use cotton gloves.

3. Wet fingers: Another simple method is to sprinkle water on your hands. The glue will quickly become solid when it meets the water, and you will not be able to touch your skin and stick your hands.

No comments:

Post a Comment