Saturday, June 27, 2020

Washing the windshield with hot water may cause the glass to burst

When the windshield wiper is stuck to the windshield by snow water on a snowy day, do not use hot water to take a hot bath for the car. This will easily cause the window to burst due to temperature changes and deform the wiper. The correct method should be to turn on the air conditioner to hot air, the blowing mode is the front windshield, and wait for the wiper to turn on naturally. In addition, you should pay attention to the use of wiper blades, such as aging or damage should be replaced in time to avoid scratching the glass.

To be foolproof, it is best to support the wiper blade when parking. When opening and closing the wiper, pay attention to wipe off the remaining snow, ice and water on the blade, and wipe the windshield to prevent wiper. The piece and the windshield were frozen together.

Due to the low temperature in winter, the viscosity of the lubricating oil is not easy to flow. After the engine is warmed up, as long as the pointer of the water temperature gauge starts to rise, you can start.

If the water in the door seam freezes and freezes the door, and the door cannot be opened, you can use hot water to pour the ice, but the door should be wiped dry immediately, otherwise the door seam will be thicker Ice.

When the vehicle is difficult to start after the hot car, the rear wheel does not turn forward and backward when driving, or the dashboard ABS warning light flashes, that is, the handbrake is frozen. At this time, do not drive forcibly, you can try to reverse gear, slam on the throttle to reverse the car (especially pay attention to no other obstacles behind the vehicle) to force the brakes away, and use the boiling water to pour the two rear wheel brake discs to melt the ice and snow.

No comments:

Post a Comment