Saturday, June 27, 2020

Do not flush the windshield with hot water after snow

Winter is a season of low temperature, cold wave and frequent snowfall, many car owners are very entangled in car maintenance after snow. The editor reminds the majority of car owners that after snow maintenance, do not use hot water to rinse the windshield snow, which can easily cause the glass to burst. Everyone can turn on the air conditioner to hot air, the blowing mode is the front windshield, and wait for the wiper to turn on naturally. In addition, you should pay attention to the use of wiper blades, such as aging or damage should be replaced in time to avoid scratching the glass.

In winter, it is best to support the wiper blades when parking. When opening and closing the wipers, pay attention to wipe off the residual snow, ice, and water on the blades. At the same time, wipe the windshield to prevent the wiper blades and windshield Frozen together.

In addition, it is also necessary to warm up the car in the winter morning. However, due to the low temperature in winter, the viscosity of the lubricating oil is not easy to flow. After starting the engine to warm up, as long as the pointer of the water temperature gauge starts to rise, you can start. Throttle the throttle.

When the vehicle is difficult to start after the hot car, the rear wheel does not turn forward and backward when driving, or the dashboard ABS warning light flashes, that is, the handbrake is frozen. At this time, do not drive forcibly, you can try to reverse gear, slam on the throttle to reverse the car (especially pay attention to no other obstacles behind the vehicle) to force the brakes away, and use the boiling water to pour the two rear wheel brake discs to melt the ice and snow.

No comments:

Post a Comment