Sunday, June 28, 2020

6 "moisture-proof techniques" and moisture teach you to prevent the car from getting wet

Perhaps you, as a car owner, are often troubled by the problem of dampness in your car, so what measures should be taken to effectively prevent this problem? The following is an introduction for everyone.

Moisture intrusion requires caution

1. The environment in the car that is prone to breeding bacteria and odors is mostly closed. Bacteria are more likely to multiply and grow in a humid environment. Some debris in the car, such as rags and biscuit boxes, are easy to mold. Odors appear, contaminating the carriage and affecting the body.

2. Hinges and locks are easy to rust. The car is parked in the open air for a long time. In addition to the rust and corrosion of the welded parts of the door and the body, the iron parts such as hinges and locks inside the door are covered by the door trim. Easy to get wet and rust.

3. The chassis is rusted. The chassis of the car is in contact with water more frequently, and it is most likely to rust due to the influence of road conditions. In addition, the car chassis does not see sunlight all year round, and moisture will also penetrate into the small holes of the chassis and rust the car body, causing the paint to peel off.

4. The brake system fails because the brake fluid is easily fused with water. Due to the wet weather, the large amount of water vapor accumulated on the brake tank is easy to enter the brake fluid. If moisture enters the brake fluid, during the braking process, The high temperature generated by friction will vaporize the water.

5. The dampness of the speaker and the CD will increase the humidity, so it will be difficult to read the disc when placing the CD. The sound of the car is easy to get wet due to rain when driving through the window. If you find that the speaker is damp, you must go to a professional outlet for repair in time.

6. The headlights are easy to enter the water. The brightness of the headlights will be affected after entering the water. If there is a lot of water, the headlights may be damaged, and the direction of the headlights will be changed, which will bring hidden dangers to driving safety.

6 major "moisture-proof techniques" and moisture

1. Turn on the air conditioning air conditioning for dehumidification and dehumidification. It should be done when it rains. When it rains, the air conditioning cold wind should be turned on. This not only removes mist, but also has the function of dehumidification. Automobile air conditioners can not only adjust the temperature of the cabin, but also effectively remove the moisture in the cabin.

2. It should be more careful to stop the rain with desiccant or dehumidification box. The accumulated moisture should be removed as soon as possible, otherwise it will be prone to mildew and other conditions. When not using a car, it is best to buy a simple dehumidification box and put it in the corners, so that the car parts are not easy to get wet after overnight.

3. UV rays under natural sunlight are of course the best and free disinfection methods. Therefore, when the weather is fine, you can find a place where it is exposed to the sun, open all the doors and the trunk lid, and let the moisture out of the car to vent and ventilate. The heated body will quickly remove the water vapor accumulated in the car. In addition, the carpets, cushions and other cotton and linen products in the car can easily absorb moisture, and should be washed and dried or replaced regularly.

4. The audio is turned on for an hour or two every day. In normal driving, it is recommended that the audio and video system work for 1-2 hours, so that it can achieve the effect of moisture resistance.

5. Open the sunroof frequently and open the side window less. The sunroof is conducive to the air circulation in the car to ensure that the owner's upper body has enough oxygen. Opening the side window can not only circulate the air, but also like to bring in some dust.

6. Chassis sealing plastic For the chassis easy to encounter water and moisture problems, the chassis can be molded.

It is best to check the engine after wading

Regarding the problem of moisture resistance, the original objects in general cars are more or less considered mold proof before leaving the factory. As long as the debris is carefully cleaned, more air-conditioning is turned on, and attention is paid to ventilation, it can be prevented.

However, the car will be flooded due to rain or wading, which may affect the performance of some components, causing it to fail to start normally. The circuit may also be short-circuited when it encounters water. If the engine is stopped while it is running, it will not be able to start again, otherwise it will easily cause engine damage.

After the car is wading, it is necessary to check the circuit in time. Once it is found that the ignition system is damp and causes poor ignition and engine performance, you can use non-fiber tissues and textiles to dry the electrical equipment, and then try to start. In addition, if the circuit encounters water, it is likely to cause a short circuit, which can easily cause the engine to be scrapped. Many car owners often find that the vehicle is short-circuited more than a week after driving on a rainy day. Therefore, after wading in rainy days, even if the engine is running normally, it is recommended to do some processing on the circuit equipment in the repair station in time.

No comments:

Post a Comment